I have just finished a week of studying 3DD, and for our project we had to come up with a crisis and design a 3D model than can solve the crisis.
I started by researching 3D responses to crisis’ and then annotated my research. This gave me a few ideas, so I then made a mind map in my sketchbook of different crisis’. One of my crisis’ was feet hurting wearing heels on a night out. To solve this problem I came up with a 3D design where a high heel shoe can transform into a flat shoe with a push of a button. This would be a very useful shoe for a night out on the town of your feet were really hurting, or if you where to go out wearing heels and the weather changed dramatically (e.g. snow).
After a few sketches of my design I started to make my model. I used rubber from a wellington boot as the sole as it was flexible so it could bend easily, and I glued cardboard onto the heel and the front to give a bit more support. I then started making the heel by cutting out strips of card and using masking tape to fix each strip into different size cylinders. I made the size difference between the cylinders very small so that they could fit inside one another and also slide out to make a big heel and stay like that. I then cut up an old bag and used that material to make two thin straps to go across the front of the shoe. I painted the shoe black to finish it off.